Digital Display Microcomputer Thermostat Temperature Controller Switch Temperature Sensor Microcomputer Thermostat for Air Conditioning System DC12V
Detalles
- BrandEujgoov
- Voltage12 Volts
- Item Weight34.12 Grams
- Display TypeLCD
- Operating Temperature6E+1 Degrees
Descripción
🌟 Master your environment with precision and ease!
- DUAL MODE DISPLAY - Seamlessly switch between Celsius and Fahrenheit to suit your preference or project needs.
- PINPOINT PRECISION - Set and monitor temperature with ultra-fine 0.1℃ accuracy for flawless climate control.
- VERSATILE APPLICATION - Perfect for air conditioning, industrial control, hatching, and more—join the pros optimizing their systems.
- PLUG PLAY INSTALLATION - Effortless wiring and flexible mounting options—panel embedded or direct install for instant setup.
- ROBUST TEMPERATURE RANGE - Handle extreme environments from freezing -50℃ to scorching 110℃ without breaking a sweat.
This DC12V digital microcomputer thermostat offers ultra-precise temperature control with 0.1℃ accuracy, a wide -50℃ to 110℃ measurement range, and dual Celsius/Fahrenheit display modes. Designed for easy installation and versatile use in air conditioning, industrial panels, and temperature-sensitive applications.
Reseñas
C**E
So far so good
As a test, I put together a prototype wine cooler. I used an old 12V Coleman picnic cooler. The wall plug power supply is 5 amps. Typical thermoelectric cooler. A Peltier element and a heatsink. A small fan is the only moving part.This cooler is well sealed, and normally cools things down to about 40F, which is too cold for wine.First I hooked the + and - power supply wires to this temperature controller, just to power it up. (The cooler is not yet plugged in.) The display lit up. The top number is the probe's current temperature. The bottom number is the temperature you want things to be. The factory setting is to Cool (rather than to Heat), to a target temperature of 68F. I needed to lower that number to 55F.After reading the poor instructions several times, messing around and pressing buttons, getting familiar with it, the bottom number started flashing. It was ready to be adjusted. I lowered it to 55F, just like you'd adjust the time on a digital clock.Then I plugged in the cooler, fully expecting this controller to smoke and fry.... But the cooler's fan just started spinning. We're in business.I got a digital thermometer and taped its probe to the controller's probe, as a double-check of the function and accuracy. Put the probes into the cooler. It started cooling, and the temperature slowly fell. (The two probes temp readings were within a degree (F) of each other throughout the process.)After about 30 minutes... 55.4.. 55.3.. 55.2... 55.1... 55. And boom... The cooler fan shut off exactly at 55.In a couple minutes the temperature rose to 57F, and the cooler turned on again. I imagine it will keep doing that forever.
M**G
Performs as advertised
My husband's experiment using this device to turn on the fan at a certain temperature was successful. It performs as advertised.
J**A
it did not work for me
temperature reading 5=7 degrees off actual temperature
M**D
Inoperable on receipt
Poor quality device only displays LLL and beeps. Unintelligible instructions.
L**A
well designed product
cheap way of cooling items
Preguntas comunes
Trustpilot
Hace 1 semana
Hace 4 días
