Tablet stand for bed, Adjustable Tablet Holder with 360 Degree Rotating&flexible Arm Compatible with iPad 2023,iPhone 15 Pro, Switch, Kindle,Samsung Tab,or Other 4.7~12.9 inch Devices

I purchased this to hold an iPad which I use as camera 2 into Zoom when teaching guitar. It can be positioned easily and quickly and also works with an iPhone. It is well designed and sturdy and very versatile. It is attached to my computer desk and folds/swivels out of the way when not in use. It is also very easy to remove and refit so is no hassle to store away when not in use. The price is very reasonable considering the build quality. I’ll be buying another one to add a camera 3.

Over the years, I’ve had a few stands for my tablet/Kindle but this is a standout one that’s admired by many visitors. Firstly it’s very well made from strong materials; fully adjustable in all directions; robust and sturdy in use; and can be moved out of the way in a trice. The second point, and one of the most important in my view, is it’s manoeuvrability. There’s a world of difference in weight and size between my iPad Pro and my Kindle, but this stand copes with both with no difficulty. It grips both well with virtually no change of them dropping, and it almost flows in it’s movement when you want to adjust it. I like that you can fit it to a vertical or horizontal surface and, as my preferred spot (as you can see from the video) is on the side of a cup stand on the arm of a soft leather armchair. Because of the fittings, there is no chance of damage to the chair’s arm and if I remove the stand, there are no marks left in the leather. The reason for this is that it uses plates rather than round screw ends to hold it in place, causing no damage to the surface. I cannot recommend this highly enough! - superb!!

Loved the idea of this and while it's great for laziness 🤪 it's bulky and heavy. Rather unsightly BUT it's good quality, holds my kindle paperwhite perfectly and alsonmy samsung tablet.

I have found this to be reasonably easy to set up and have attached it to my headboard for the bedtime read/music from my Tablet which fits perfectly and holds it firm. However please be mindful that if you pull on it using one of the two spring loaded holding arms this can open it out allowing the phone/tablet to drop or slide down but only if pulling on it to hard. It definitely feels sturdy and well built and functions well when moving to different positions. Overal would definitely recommend.

Great for both tablets and phones, it firmly holds both and is easy to remove them too. Easy to charge your phone or tablet while in place. It really is adjustable to any angle and you can easily adjust the tightness of each angle joint for perfect viewing.

The final length cannot be tensioned enough to hold 12" tablet, so you have to be creative to get it to balance, and not droop. The nut on tablet clasp has snapped, meaning no longer tension the "ball joint"; it lasted 12 months, with occasional use.

Bought this for my partner as he hurt his back and needed a stand for his tablet, it’s really sturdy and moves about great

Great for the price. It’s sturdy and well made. My only warning is, if you have a metal bed frame and not a square edge frame. The clamp will not hold on a circular frame. I’ve used the bedside table to secure it instead. Works fine.

Updated December 2023: 1st unit still holding up as good as the day it was bought. I Just bought a 2nd unit for my home, for all the original reasons stated below in the original review. These tablet arms are incredibly handy and useful, I found myself constantly moving mine around to different rooms where I needed it. Decided to buy a 2nd one (I'll probably buy a few more yet eventually). Bought this for holding an Amazon Fire HD8 Tablet and a portable 13" secondary flatpanel monitor screen holder. The product is EXACTLY as the promo images display. This review might be a bit on the long side however i'll cover several uses i've found to be really handy that nobody sofar has mentioned in their reviews. I'm very impressed by the build quality All metal frame, springs and bolts, including the whole bracket clamp. Only non metal parts are the plastic knobs ends on the tension-bolts, the spring loaded tablet clamp grip assembly, and tightening nut at the back of that clamp grip assembly, and silicon pad on the bracket clamps themselves as to not damage or leave marks the finish on any choice of furniture you chose to mount the base on, whether it be it a bedside night stand, headboard, coffee table, countertop, table, glass top table or glass-top coffee table or wall shelf; or just about anywhere else you can think of. The base bracket clamp has 2 socket mounting options to clamp onto - horizontally (ie: table ledge) or vertically (ie: headboard), and the clamp has a full minimum 1/4" to 3" maximum clearance to accommodate some very thin (glass top coffee table) and thick mounting applications like a headboard. The tablet stand is very sturdy, while priced affordably. The Tablet stand has 6 tension-bolts: - one for the clamp plate adjustment screw, a good sized thick round knob with 5 deep finger sized indentations that allow you to firmly grip and tighten the clamp to the surface/ledge/etc spot you have chosen. It doesn't matter if you have small or large hands, thin or thick fingers, or wearing gloves, you'd have no problem or issue getting a solid grip on this knob. - one on the base clamp bracket with 2 holes - one for each orientation which will secure the tablet stand, preventing from swinging to either side if you prefer or require a "fixed" placement of the arm. - three on the remaining arm hinge joints (base, middle end), which lock the 2 arm sections in the position you want them - one on at the very end that connects the end of the tablet arm with the 2 sets of short metal rods, with one of the rods ending in a ball-joint to the backplate of the tablet gripper assembly. The tablet arm comes neatly folded inside a small box, with a easy to understand set of instructions, Assembly is very minimal, and that covers both the horizontal or vertical orientation of the base bracket clamp, and the attachment of the spring loaded tablet gripper holder assembly - which is a plastic nut and a ball-joint / ball-joint socket. Setup of the tablet arm is very simple, once choosing an adequate spot/surface/ledge to tighten the base clamp onto attaching that tablet gripper assembly and inserting the tablet arm into the rod, it's merely a matter of positioning the tablet arm and tightening those tension knobs, and lastly your tablet or display device between the pair of padded grip holders. As advertised, the spring loaded tablet clamps will accommodate devices within 5 3/8" to 11" size, as the clamps extend just a little past 11". - Both clamps measure at 2 5/8" wide across. - The rubber padded lip has a full 5/8" of depth for gripping onto whatever phone, tablet or screen that will fit within the 5 3/8" to 11" measurement. - Both top and bottom lips are slotted across inside to accommodate most usb charge cables and headphone cables, The slot measures about 1 3/4" wide by 3/8" deep, should the device your using (a phone or tablet) require charging; and/or should you want to plug in your headphones - The springs in those clamps have a considerable amount of tension 'clamping force' that will keep your device/tablet/screen securely in place if it gets accidentally bumped. Testing and using the tablet arm, I use this tablet arm with 5 different devices, in several different setups: 2 brands / sizes of smart phones, one of them being 'phablet' in size with a 6" screen, both phones with protective cases on. I found removing the cases was unnecessary. The phones are held in the typical portrait mode, and the usb cables I have on hand, do have enough clearance through the inner lip slot, and also able to comfortably fit 3.5mm headphone cable as well. Amazon Fire tablet HD8, in both portrait and landscape modes, the spring loaded grips extend wide enough to hold the HD8 on both long or short edges (8 1/8" x 5 5/8"), and the spring tension has enough to hold the tablet snug and firm, even while the tablet is within its case. Alternative Pc / Laptop display mount: For people who use their laptops while laying down in bed and get tired of constantly bending their neck down to look at the screen, I tested a 15" portable monitor (Amazon has a bunch in the store here - just search for 'portable monitor' ), the only caveat here is you'd need to have a hdmi + power cable extension or single usb cable long enough to reach said computer / laptop / video source and use zip-ties to fasten the cables neatly along the length of the arm to keep things tidy. That being said, this Tablet Stand is a very unique and convenient solution, allowing the person to comfortably lay back in bed and keeping their neck in a more neutral posture position. No more sore necks, and your neck will thank you. Alternatively, this Tablet Stand works great clamped to the side of the computer desk or livingroom end table to mount a portable 15" monitor for use as a secondary or third display screen when desk space / workpace is cramped, limited or simply unable to fit an extra display screen. A person could buy and use 2 of these and have a 3 monitor display spread on a desk/workspace that's only big enough for a single monitor or laptop. I've tried this and it works wonderfully in my livingroom - sitting at the end of the sofa or in the arm-chair with an end table off to the side, I'm able to use the laptop with a second screen, and have the second screen positioned exactly where I want / need it. This is also true when needing a third arm and spare hand to hold your cell phone or tablet while working in tandem with your laptop. Its a great hands-free device holder and mount. I also have a 2-in-1 convertible 11.6" sized chromebook (brand unimportant, 11.6" is a common chromebook size), that has a touch-screen and the screen lid folds a full 180 degrees to the other side / backside of the keyboard converting from laptop to 'tablet mode' . The outer dimensions of the chromebook is 8 1/8" x 11 3/4", and the tablet arm grippers does accommodate the 8 1/8" 'landscape' orientation without issue. There's enough 'lip' on those grippers, and this tablet arm is rated for up to 1500grams (1.5kg / 3.3lb), which is within the weight of the chromebook i have. The Chromebook is arguably the heaviest of the devices I tried, and once those tension knobs are tightened, there's only a slightest bit of jiggle/wobble if tapping the screen with your finger using one of those android screen styluses. The ball-joint socket at the back of the tablet gripper assembly is also quite sturdy, I'm able to tighten the nut enough so that the gripper plate is stiff and holds the position you set it to, wile at the same time still able to tilt / adjust whichever device I'm using to a comfortable viewing angle.

It does its job well. So well in fact, my dad wants one too. So I ordered a second one! Installing was easy. Great for watching videos handsfree and reading novels with auto scroller/remote. The phone stays in place without moving. However it does shake quite a bit if you do intend to touch the screen by hand so definitely would recommend one of those phone remotes/controllers or something similar.

I use this to hold my iPhone and kindle When I’m reading in bed. There’s a small learning curve to figuring out how to put your phone in the holder with only two hands - you can thread the charger through the bottom, and then plug it into your phone, and that helps. It’s very sturdy, even though it’s very light, and it will hold your phone in many different positions. After a year and a half of using it every day, sometimes for long periods of time, it still works. Recently I had my first problem with it, the last ball joint came loose and so my phone was prone to tip sideways, this was easy to fix by unscrewing the joint and putting a little epoxy in it. It is good as new again. I can’t hold my phone due to physical illness and damage, and it’s really helpful to have this tool that will hold it right in front of my face for as long as necessary. I tried to other phone holders before getting this one, one that went around my neck and was very uncomfortable, and one that relied on a single flexible tube. The flexible tube that attaches to your table is really bouncy, so when you scroll or turn pages there’s a lot of rebound, and that makes it hard to read. Every phone holder has this problem to some extent, but this one has the least. Also, If you can prop one hand up on pillows to give it a little support, that helps.

Tengo un Smartphone rugerizado no apto para las dimensiones de este dispositivo ya que tiene un grosor de 18 mm pero aun así lo sujeta bien aunque por lo mismo, no puedo conectar su cable de carga, tambien sujeta muy bien una Nintendo switch sin los joycon

والله أعلم المنتج الي وصلني مقلد لاني ما شفت شعار الشركة في الكرتونة، لكن بشكل عام المنتج يفي بالغرض بس اخر مسمار مش Adjustable والايباد شوي يميل