CJRB Crag Folding Pocket Knife, 3.43" AR-RPM9 Steel Blade Carbon Fiber Handle EDC Knife with Pocket Clip for Men Women Camping Survival Hiking, Black (J1904)

This knife has been such an impressive piece of cutlery! I have been collecting, using, working with, and training with knives for well over a decade now. But to see how the budget range of knives have really upped their game in what they have to offer is astonishing! I bought this knife a little over a year ago, I chose this knife because for a while I was using a sog flashback as my beater knife I carried to work, cut boxes with, dug out things with, did light prying with, and all around stupid semi abusive activities with. I will be honest I hate the flashback, I wanted a knife that was cheap in price, but high in value, well made, held an edge well, and overall cut well! Boy did I find what I was looking for in this knife! Firstly I bought this on sale for $34, and at that price how could I say no? It has a powder formed version of 9Cr18MoV steel in Artisan/CJRB's proprietary formula they brought to the budget market. I love this steel! It's extremely rust resistant, holds an edge very well, and comes back to life on a ceramic rod and a strop. I use this knife everyday, I have broken down hundreds of feet of cardboard and it's still shaving sharp with the factory edge! It's never gone fully dull, I just touch it up with a ceramic rod, light stropping and it's back in action! The coating has held up phenomenally, still no scratches to the coating and it's been dropped on concrete, stood up to sea water while on my boat here in Florida, been through fruit, cardboard, tape, wood, etc. The peel ply carbon fiber is very classy looking for such an affordable knife! I will say it does have some hot spots on the edges of the scales, specifically on the inner edges of the steel liners. However it's a sub $50 knife full price so not too much to complain about. The grind is symmetrical, thin behind the edge but with enough meat to withstand tougher media on this flat grind. The action is fairly snappy and smooth, although before it was broken in, my finger occasionally would slip off the flipper tab since it has no jimping. The red pivot collar is attractive and really pops on the black background of the knife. It's definitely not as high quality as my more expensive knives, but for a budget beast, it's one hell of a knife! I couldn't recommend this knife more! CJRB/Artisan knocked this out of the park.

I just recently started to get into cleaver style blades which are immensely easier to sharpen. I was looking into a budget friendly knife with powder metallurgy that was incorporated into the blade manufacturing process. I did my research and it seems that the AR-RPM9 material seems to have good marks for edge retention, easy of sharpening, toughness and corrosion resistance. ( This is Artisan Cutlery's proprietary development for their budget knives). I also decided that I wanted something with a simpler liner lock system and passed on the button type locks or the recoil locking mechanism on the CJRB knife, since there would be less potential mechanical problems in the future with the knife. I reviewed the reviews on CJRB Crag knife and made my decision to purchase it. ( I have collected knives for over 30 years and have over twenty knives ranging from Benchmades, Kershaw Cutlery, Spyderco, Zero Tolerance, and Kubey Knives. ) . Basically, I view some of the YouTube review videos such as Nick Shabazz and GideonsTactical to evaluate the pros and cons of any knife that I plan to purchase. Since I just picked up the knife today, I took a closer look at it . The quality of this Crag model is impressive. The blade has a good lock up with the liner lock system . Although, upon inspection, there is no steel block insert in the liner lock to assist with the wear on the liner, but this is a " budget" knife, so this is not a "deal breaker." The model that I received had no directional "play," and when I used the thumb flipper, it was firm yet smooth upon the blade deployment. The one thing that I noticed was that the edge was not sharp, so I had to sharpen it. I used my WorkSharp Precision sharpener at a 23 degree angle and started with 600 grit and, then, 800 grit, 20 passes on each side of the blade, starting from tip to heel using a " pull" motion. Reason I started from the tip is to maintain the point and avoid the "rounding" effect. Overall, after I was done sharpening the blade, the black PVD finish was unblemished and the blade has a sharp working edge. 23 degree sharpening angle is a compromise for the blade to have a durable yet sharp edge. (The thinner the angle will result in a less durable edge but closer to being "razor like" sharpness so it is a trade off.) I'll have to see how the knife performs at work, but I think it will be a definite winner. If you are looking for potentially good, but budget value knife, this one is worth considering since it has a nice thick blade stock as well as a nice, firm and smooth"flipper" system. Also, if you are looking for an easy sharpening system and have troubles using whetstones for sharpening, the WorkSharp Precision Elite Sharpener is an excellent alternate choice.

This is a very well crafted knife that punches way above its price. As you can see in the photos, I have abused this knife, but that’s only because this is a very trustworthy that does more than just looking nice. The cleaver/reverse-tonto shape gives it a lot of toughness and the finger choil is very comfy for both precise and forceful cuts. I have been beating on this knife for over 4 weeks straight and I only had to sharpen it once. The edge retention is slightly lower than D2 which is a compliment, and it is much much easier to sharpen. This knife feels like it right at home on the whetstone. It’s the first knife I learned to sharpen to razor sharpness because of how easy the steel is to sharpen and how well the curvature of the blade fits the natural hand movement during sharpening. The knife already arrived super sharp from the factory (shaves 70% of the hair it passes over per swipe) and takes almost 80% as long to stay sharp as D2 and takes around 40% of the time to sharpen and strop. This powder steel from CJRB is very impressive. The action is very fidgety and the detent strength is just perfect, not too strong not too weak. The liner lock is smooth and doesn’t require a lot of force to actuate it. I was still a beginner knife collector when I first got it yet it felt comfortable and easy to manipulate instantly. The only way I can think of improving this knife is upgrading it to M390 and changing the handle to a matte textured carbon fiber for better grip and switching to a sturdier frame lock using a Titanuim frame with the carbon fiber. The current handles are glossy and are the only reminder that this is a sub $50 knife. While they do provide good toughness and grip they easily collect fingerprints and other lipids secreted by the skin.

Bien producto aunque la hija podrían hacerla más gruesa y mejorarla el recubrimiento bien

Kaufen!

Frenchement magnifique

Zadowolony