BANG TI Titanium EDC Pry Bar with Bottle Opener Function (PunisherPB)

Let me preface this by saying this is absolutely insane that this could be bought for what you're getting. It's not the absolute best of the best when it comes to titanium tools, but can you compare a $400 tool to this? PROS- EXCELLENT VALUE: please, get this for the sake that it's so cheap. Neat design for those who like skulls and what not: although I'm not much of a fan of it, I have overlooked it. Decent finish: there is a glossy smooth finish on the outside (and within the bottle opener) of the tool. Outer edges are chamfered: you won't be cutting up your hand prying anything due to this tool. Great size for a keychain: this is just slightly bigger than a key, so it will fit nicely on a keychain. Magnet tested for titanium: the only other material could be aluminum, but aluminum would be lighter (according to other reviews, it's real titanium). Stubbs on sides is good for grip: thanks to the chamfered edges, it's not really rough on the hands, and adds a coolness to it (in my opinion). ~~~~~ CONS - The inner edge (where the wrench is) is not chamfered, and has a rough edge to it. I would be careful putting this in any tight pocket. (This does not really effect the comfort of holding it) This is a small pry tool, and not one for hard use. If you're gonna be using this to pull tires off rims of semi trucks, I would look elsewhere. This (due to its size) requires a keychain. However, the hole is not wide, and the hole is long. This makes it awkward to put anywhere, and requires you to get proper key rings of size and placement. This is a nitpick, but it's something to keep in mind (I recommend getting a keyring set along with this). The bottle opener is flat on the inside, and does not have an inner lip to grab the cap properly. I never needed a bottle opener, so personally I don't care. But upon observation for the sake of this review, I have noticed the bottle opener isn't good. The nail puller is offset of the end of the pry tool. I'm not talking about the offset pry end relative to the whole tool, but relative to the prying end of it. It's noticeably offset, but does not hinder the function of either the nail puller or the pry end. I mentioned before this tool has a decent glossy finish. However, machining marks are obvious, and there's no satin or bead blasted finishes (that you would see with more expensive titanium tools) at all. The ramp on the pry end has zig-zag marks, and there's tiny scratch marks that the finish couldn't cover up. I have reason to suspect that his is a softer titanium, one of the reasons for the cost of this tool. However, I have no issues with that, since I won't be splitting wood with it anytime soon. ~~~~~ Functionally (as a pry tool) I found no issues with this.

This is a nice little multi tool bar to carry around for emergency. I bought this for my oversea trip just in case I need a simple tool for quick fixes for Taiwan house. The flat end of the pry bar is sharp at the edges. I used it to open boxes and cut weather seal trips while in Taiwan. Bottle opener end was great when I needed it to open soft drink bottles in restaurants. Back in US I used the tool bar to use the pry bar to remove flat head thumb tacks during several volunteer activities. The multitool bar is pretty strong for emergency small jobs. After 3 months of usage it showes little sign of wears. Size is perfect for carry with keychain. Edge of pry bar end is a little sharp, carry with caution. Only thing I would like to see is a small measuring ruler on the side.

I was immediately impressed with the quality of this product. Similar products claimed to be titanium but were really steel. This one seemed to be the real deal and I was happy to find it is in fact titanium. It is extremely lightweight and ridgid with a decent toolset. The attention to detail in the design is impressive and what I would expect from a more expensive product. All the edges are rounded and the tool is comfortable to use. I heat anodized it with a blowtorch for a unique finish. I think it came out pretty cool. I definitely plan to buy more Bang Ti products.

"A knife is both the most expensive and least effective pry tool you'll ever own." -My Brother, Immediately prior to sending me the link for this tool. It's a great, inexpensive, tool. Does the job, kicks ass and takes punishment. Great for opening packages, prying apart objects and opening a beer. My only issue is that this isn't an American company.

This is a tiny little pry bar- Very light yet seemingly well designed. I like the ridges on the sides, but the nut grabbers are for squat. The prying action is actually quite good for such a tiny pry bar, and the Skull design is just all sorts of cool. 👍🏻

I was glad to see this was made and finished well. I've had my eye on this for years! I heat-treated it to give it that gorgeous multi colored titanium look. This is made from some good titanium stock, not cheap wannabe metals.

My husband loves it!

This has a good weight and size to it. I would use my keys to do something if I was out and in a jam. Sometimes bending them. This titanium one is great. I don't know about the steel version but this one is solid.

デザインと機能面で、購入 サイズ的にも、納得の品でした

This looks great, I’m into skulls and it’s definitely a great addition to my keychain

注文した品物が到着。 商品説明と届いたモノの違いが、 「チタン製」のはずですが磁石にカチンとつく、あるはずのない磁性があります。オマケ？ レーザーでの刻印がない（写真） かの国から届いたのですが、そういう意味では期待通りです。 他の購入者のコメントをちゃんと信じれば良かった。

My biggest issue is that where you would expect to be able to use a standard 1/4" bit driver, its slightly to big. So it cant be used as a screwdriver. Other than that (and the scratches) its light and strong, very nice precision laser cut im guessing as i cant see any tool marks.

This “tool” just arrived and it’s first task resulted in some chipping. Apparently you shouldn’t be using this pry bar as a pry or a screwdriver!? Novelty at best, not a serious EDC tool. Thank goodness I got it “on sale” for $13.99.