hello, for sharpening kitchen knives, is it a good practice to go from 1200 grit to 4000 ( DMT STONES )

My rule of thumb is to only double the git for each sharpening step. So, from 250 grit coarse to 400, then to 800, then to 1200, then to 2000, then to 4,000, then to 8,000. The last three grits are mainly for polishing. If you skip a grit, it is like skipping a grit in sanding a wood project, in that you have to spend a lot more time with the higher grit, then if you had used a medium grit. So I would say no, do not go from 1200 grit to 4000. Instead, go from 1200 to 2,000. DMT makes a 2,000 grit diamond stone by the way.

Many of the reviews are terrible, especially the recent ones. i am skeptical of buying this item. has dmt worked out the issues?

I just left the DMT corporate headquarters 2 hours ago. I went over there to buy an Extra Course bench stone direct from them. It was more expensive than these are on Amazon and I made point to mention it to them. They said they do not sell any of their products for less than their distributors and said that any deeply discounted stones may be suspect. If they don't have the DMT Logo on them they may be knock offs. They will knock off anything in China these days. I bought some sneakers which looked EXACTLY like the real things except the inner soles were different and they were made in colors not available by And1. Obviously knock offs. Take that for what it is worth. I have had 3 of the 11x2.5" bench stones for more than 20 years. I bought them from Highland Hardware, now Highland Woodworking, of Atlanta, Georgia. I also have another 1/2 dozen smaller 6x1" hand stones for portable knife sharpening, ranging from Extra Coarse up through Extra Extra Fine, with some duplication. I have not had any issues with any of them. DMT told me that they will replace any defective stones. The secret to using these effectively is to not strong arm them. They pointed out to me just today that it only takes light pressure to make them work well. These diamond stones do have to be cleaned of the swarf after use. I use Comet or similar cleaner with a Scotchbrite sponge. This is how you clean Alumina or ceramic Crock Sticks as well. I always dry the stones with paper towels and then let them air dry before I put them away. These stones do require break in. When they are new they may leave larger scratches in the blade than after they are broken in. You will also notice that they make more noise before they are broken in. You may notice the difference more in the finer grits. You don't have to do anything besides use them to break them in but they will seem to become quieter and smoother after a little use but they do not lose any effectiveness. In fact just the opposite. They will work better. If want you can use a lower quality blade to break them in particularly if you are using very fine grits on expensive knives.

if i only want to sharpen kitchen knives do i need more than 1 plate? which one do i need? ty

#1 don't get anything from DMT, get the Ultra sharp stones. #2 start with 600 grit plate for decent sharpness. #3 depending on how sharp you want to go, get the 1200 grit plate for excellent sharpness. If you want sharper, say razor sharpness you will need some skill and a water stone. You'll have to decide your self by trying the first stone if you need to go finer.

Is this the only stone I need for general sharpening? I’m a beginner

It would probably be okay, if you never let the edge get too rough. It would take a while to repair any kind of neglect with this. This also wouldn't get an edge razor sharp, but would get it close enough that you could hit it with a strop or steel. I love my diamond stones, but if I had to use only one stone I'd probably go with a good natural oil stone.

Desertcart Logo

Join PRO & Unlock Exclusive Perks!

Descargar la aplicación

Fuidamos elementos de

EAU
UK
India
EE.UU
Japón

Servicios al cliente

Sobre nosotros

Soporte al cliente

Nuestras Otras Marcas:Hewyn|Selfship

Reseñas

P**E

My stone had a manufacturing issue that I discovered after the return window had closet but DMT support solved it in an excellent way. I'm very happy with my stone and the support experience I had couldn't be better. Fully recommended!

8.03.2024

K**N

zag er gebruikt uit.

6.06.2023

U**K

Otrzymałem fabryczny bubel. Na całej powierzchni ostrzałki widoczne są koloste ślady obróbki. Na powierzchni widoczne są liczne wgłębienia. W firmie DMT komtrola jakości chyba nie istnieje, skoro coś takiego wysyła się do klienta. Na potwierdzenie mogę dodać, że zamowiłem ten sam towar jaszcze raz. I ten jest OK. Więc jak widać loteria. Procedura zwrotu przez Amazon - kiedyś odbierał przesyłkę kurier. Teraz trzeba się udać do punktu DHL. Chciałem wysłać przesyłkę bez konieczności drukowania etykiety. Okzało się to niemożlliwe, choć wybrałem punkt w którym taka wysyłka powinna być możliwa.

30.05.2022

T**S

Just pretty much reprofiled an old kitchen knife with a 600 grit fine stone!! These stones are very very effective. Normally you'd need a 120 or 240. Ive been hand sharpening for a couple of years now with wetstones so am pretty experienced. This stone is exceptional and ideal for beginners. A 600 grit stone is normally a third stone before a 1000 and then 4000/6000 polish. However this 600 is way more effective than a 600 grit wetstone so the results are immediate and significant. All I can say is that they work a lot quicker than wetstones so take it easy with new or already sharp knives. Burr creation is profound so very easy to tell when youve apexed. Even old difficult to sharpen knives wont last two minutes with this thing, so glad I found it. I follow a guy on youtube who taught me how to sharpen, look him up. His youtube profile is OUTDOORS55. His name is Alex. He got me into DMT stones and gives great tutorials on every day sharpening using cost effective stones. No need for Japanese chosera stones at £200, get one of these american imports, sharpen from a fine stone and then strop to shaving sharpness!

17.03.2020

K**U

Uzerinde acayip cipler ve dokusunda problem varmis ve diger tas ve usturamin canina okudu... esyalarimi duzeltmekle anormal vakit harcadim... defolu urun veya marka kaliteyi acayip dusurmus...

6.11.2023

1. Suresh K.

Me impresionó mucho la calidad y la entrega rápida. Volveré a comprar aquí.

Hace 4 días

Por Neha S.

Excelente comunicación durante todo el proceso de pedido. El producto es perfecto.

Hace 2 semanas

Pooja R.

El servicio al cliente superó mis expectativas. Perfecto para comprar productos que no encuentras en otro lado.

Hace 1 semana

Reema J.

Plataforma perfecta para artículos difíciles de encontrar. La entrega fue rápida.

Hace 1 mes

ASIN	B0001WP1LK
Best Sellers Rank	#249,011 in Home Improvement ( See Top 100 in Home Improvement ) #187 in Sharpening Stones
Brand	DMT
Country of Origin	USA
Global Trade Identification Number	00017042007676
Grit Type	Fine
Item Dimensions LxWxH	14 x 35 x 2 Centimeters
Item Weight	1 kg
Item model number	D8F
Manufacturer	DMT
Material	Diamond
UPC	017042007676

DMT D8F 8-Inch Dia-Sharp Continuous Diamond Fine

Detalles

Descripción

Presupuesto

Reseñas

Preguntas comunes