SNZB-01P Zigbee Wireless Switch, 2 Way Control Supports to Create Smart Scenes, Trigger The Connected Devices on eWeLink APP, 5 Years Battery Life, Requires Zigbee Hub

Connects to Home Assistant using ZHA without issue. Controls my lights fine.

Used for scene or event activation in home assistant. Works well, three options to press detected in HA and nodered. Range is not bad to zigbee sonoff hub, but it does need to be in the middle of the house. So all in all good product for switching lights on and off, and anything in Alexa too. They are supplied with fixing and orange magnetic plate that holds the switch to the wall. Double sided tape too.

Super easy to pair to home assistant and it works fast and well.

Click on the main button failed within months. Not heavily used. maybe daily I took it apart and its the actual click button component. just loose now with no click. While my review is accurate I have to hand it to Sonof who reached out to verify my issue was hardware related and offered a replacement or refund which, to me at least, means the hardware failure isn't common or a known issue. For customer service I would buy again. I have other sonof products that are working fine.

Easy to set up, it turns in the lights for me when I wake up in the night and then two clicks and all the lights off. Think it has three different clic settings for automation, easy to set up, adhesive to stick to anything

Update: 12/01/2025: As of update 1.7.0 of the Zigbee Bridge Ultra, the button is exposed properly to Homekit and Home Assistant. I did end up paying to try the IFTTT integration and and am happy to report that this works fine for whoever wants that, albeit with a slight latency delay for actions to occur. Local control is of course better so I really appreciate this issue being fixed. It still doesn't show up in Google Home but that may just be a Google issue, I don't really use that much anyway but had it bridged simply because of how easy the Hub I'm using makes it do this. The main things I care about are using this button with Apple Home and Home Assistant and they are both working fine now. ----- First of all, I promise to update this review if there's any updates. - The general quality of the button seems fine - You can press it, double press it and long press it as advertised - Pairing is simple and easy as I've come to expect with SONOFF (the eWelink app could be improved a little bit though to ask what to name the device and which room to put it in. I also wish the name exposed over Matter was the name you use for devices in the settings. If the Zigbee Bridge software could be updated to do that then that would be marvellous. It's a bit hard to find duplicate devices sometimes when you have more than one of the same device and they all have generic product names) HOWEVER: - The button does not show up in Google Home - The button shows up in Home Assistant (linked with Matter), however it is listed as "Unknown" I am aware that Matter as an ecosystem is still in its infancy and some teething problems are perhaps expected and will update this review accordingly if this is fixed. As it stands, don't buy this if you want to use it with Google Home or Home Assistant (over Matter). I would like to try to the IFTTT support (which could be used with webhooks to workaround this) but one of the things they don't tell you in the description is that this requires a £10 a year subscription. To be fair that's not a terrible price but I'm hesitant to try it given the issues I've faced.

Arrived. Remove battery tape and pressed side button for +5 seconds. Completely dead. Sent back.

Paired first time with Home assistant. Works within fridge as well.

Ok

Very easy to set-up out of the box with home assistant. Only 1 button but recognises different types of press and can be programmed to perform different functions. Long battery life compared to others. Be mindful when opening the battery cover that there is safety feature. You must use the provided pin or use a paper clip to release the lock!

Ich brauchte einen Schalter, mit dem ich in einem Einbauschrank einen LED-Strip ein- und ausschalten kann. Da ich schon einige andere Komponenten von Sonoff einsetze und mit diesen bisher ganz zufrieden bin, habe ich mich für den SNZB-01P entschieden. Erster Eindruck und Montage: Auspacken, Streifen aus dem Batteriefach hinausziehen - schon ist der Schalter einsatzbereit. Das Gehäuse ist etwas größer als erwartet (mein Hue-Button ist ohne die Halterung deutlich kleiner), macht aber einen soliden Eindruck. Der Schalter hat einen angenehmen Druckpunkt, nichts klappert oder wackelt. Der Schalter hält magnetisch auf einer orangefarbenen Metallplatte, die kann man an die Wand (etc.) kleben oder schrauben. Ich habe es erst einmal mit dem mitgelieferten Klebepad versucht. Integration und Funktionalität: Das Koppeln in HomeAssistant ist intuitiv (kleiner Button für den Kopplungsmodus an der Seite des Schalters) und hat auf Anhieb geklappt. Es werden einzelne, doppelte und lange Tastendrücke erkannt. Der Schalter funktioniert bisher sehr zuverlässig. Fazit: Wen der orange Ring letztlich (optisch) an der Wand nicht stört, für den ist dieser Schalter eine gute Wahl. Ich bin auf die Batterielaufzeit gespannt, erwarte aber eigentlich keine bösen Überraschungen dahingehend.

No funciono. Intente con 2 hubs diferentes pude agregarlo a la app pero el botón no cumple ninguna funcion

Üç ayrı fonksiyon atması yapabiliyorsunuz. Tek çift ve uzun basma şeklinde. Bunu üç ayrı cihaz için yapabilirsiniz. Zigbee protokolü ile çalışan bir cihaz olduğu için wifi ağlara bağlanan bir merkez bağlantıya ihtiyaç duyduğunu akılda tutun. Bir yere sabitlemek için bir montaj kiti var. Ama ben evde buzdolabına sabitledim. Mıknatıslı kısımın düğmenin yer aldığı kısımda olması güzel olmuş.