Seville Classics LED Lighted Pegboard Workcenter with 23 Peg Hook Assortment and Drawer Table, 48", Granite Gray

Amazing quality; well-packed / rock solid. It's challenging to find a high-quality workbench online that doesn't cost three times the price of a 'Seville Classics HD Workbench.' I have been buying, ordering and putting together tools and equipment for more than 30 years. Unlike most, this was packed well; everything was labeled. The setup instructions were clear, and what amazed me over and over was the high quality materials and attention to details. This bench comes with 'extras' others would charge for (light [with bulb]), easily attached power strip, non guesswork instructions,) but the maker/seller priced it right and gives you everything you need for a job well done--no running to the hardware store for this or that--all you will probably want to add is a decent vise that suits the work you plan to do. I recommend this bench, and if other products in the 'Seville HD' line are as well designed and manufactured, a person could set up an entire garage with bench and storage gear from a single manufacturer. Pros: 1) Use of welded, threaded inserts throughout--High quality materials--durable finish; extremely well packed (box arrives looking worn due to the weight inside and shipping cross-country, but it's double boxed; interior compartments are Styrofoam reinforced.) 2) Any painted surface is wrapped in plastic to help ensure defect-free delivery 3) Every screw or bolt went in right the first time; bags of 'extra' screws/nuts/bolts just in case 4) Clear instructions and accurate drawings; have a magnifier handy for drawings 5) Solidly built / lots of thought evident in packaging and labeling of all parts 6) Hardwood top alone (compared to other benches) is worth the price 7) Lots of helpful directional labels showing 'top' / 'front' / 'back' / 'left' / 'right' on components where such positioning guidance is needed; makes fool-proof assembly easier 8) Drawers are held together with so many screws I have complete confidence in their load-bearing ability; 9) Drawer slides were a bit tricky to install -- but follow the manual's advice about loose-fitting the bracket retention mount screws until drawers are set Cons: 1) I didn't find this product two benches ago! 2) Two people are advisable for some assembly steps; I managed with 1 person, a small stepladder and a few Irwin one-handed clamps, but 2 on the job would have helped General tips: A. Read the instructions -- They're a bit wordy for experienced people, but thorough so novices will get it right B. Carefully remove hardwood top from inside packaging (it's held as a box-in-a-box); it is packed with Styrofoam sheets that protect it, but had the disadvantage of ‘greasing the skids’ around 50 pounds of hardwood; it slides out very easily -- weight can carry it to the floor (and damage it) in half a second -- I luckily caught mine / no damage. C. Included screwdriver is adequate, but I found a small power driver set on a low torque / low speed moved the job along--use only if very familiar with your driver because it is easy to over-tighten screws. D. have a large work area to set this up -- finished piece sits counter high -- top is 2x4 feet and overall height (floor to top of pegboard,) is a bit over 5.5 feet tall; it takes 2x to 3x that much space to set it up without tripping over yourself Other than a handmade bench designed by a master craftsman, this is the best bench I have found for the money; it is a solid, well-made piece that is heavy enough to use for metal and wood working, maintenance, a reloading bench or other work that needs storage, counter space, and is substantial enough to hold a 4-6 inch vise. You can mount a woodworker’s vise on either end and there is enough space for a steel or cast iron mechanics bench vise depending on what else is going onto the work surface. This is easily three times the quality of anything you'll find at Harbor Freight and most DIY stores, yet it’s a third to half the price!....If you need a bench that will last for years and stand up to anything except deliberate abuse with a sledgehammer, this is the one!

This is really well made; solid; and quite a bargain in price. Mine was missing a few screws; I did not called the company to get replacements. The drawer is fantastic with ball bearing races but you cannot install the drawer if you are going to mount a vise or a reloading press on the bench. The bench is real wood; I don't know what its called; made out of strips of real wood glued together; solid as a rock; I drilled 3/8" holes thru mine to bolt on a "rockchucker" reloading press. I made careful measurements of the pre drilled holes for installing the drawer and plan to use the drawer under another work bench. It is a beautiful drawer, eh? I would suggest to Seville that they make the drawer 1/2 size and provide 2 sets of pre drilled holes so we could mount the drawer on either side leaving room to mount a vise or reloading press. It took me all day to assemble it minus the drawer; I started with the bench up side down on a table; I did need help once I had the legs on it to set it on the floor and to move it into position when completed. (I am an 80 year old over weight disabled veteran, eh?) I normally don't consult instructions but you will find it help full to follow them on this bench. I used an electric screw driver; I tested the provided wrench and it will work; it also works great to level the bench; a full size open end wrench won't fit in there to do that. Over all I am very happy with my bench and recommend it as a reloading bench if you realize you must leave off the drawer for that.

First of all...if you found it did not go together well please read the instructions. I found them to be very well written, the illustrations were good, and everything was clearly marked as to what goes where. The only issue I had was 1 missing bolt, but I had a spare lying around so I was fine. The construction is extremely solid. All the parts appear to be electrostatic painted, and heavily coated/covered very well. The drawers are solid and have a perfect amount of resistance so they don't fly open jarring contents. The work area is extremely heavy duty. It is very stable as far as the legs are concerned. The back is a tiny bit wobbly but not bad. The thing that impressed me is the engineering. Thy thought through a lot of smaller details that make this a sturdy assembly and very useful shop addition. Everything fits perfectly and the top light, bottom power strip (both supplied) are nice touches. Everything in this kit is heavy duty and very well made. Once assembled I think the garage hobbyist will have a lifetime relationship going on. Cons....there were a couple but nothing that detracts terribly.... 1. The packing could be better. There were a couple of bent corners on pieces due to inadequate corner protection. Since this is a very heavy package it is bound to get dropped some in shipping. I can see serious damage if dropped a decent height (foot or more). The corners simply need more protection. 2. It takes 2 strong people to lift this around. They do tell you this on the box, so I guess this really isn't a valid grip but more of a warning. If you try to get this to the garage by yourself without a dolly or hand cart you will probably kick in gripe #1 (above). 3. The back could use one more brace in the middle. I think this would make it perfect, but cost might creep up (as it would with gripe #1). Overall this is an excellent product. Very well executed on the engineering and production. I highly recommend it to anyone looking for a garage workbench. If I had a larger area to work in I would probably fill it with Seville Classics products. They to be top notch manufacturers. ...if only I could get paid for promotions or product enhancement ideas....SIGH.

La notice de montage, en français, est détaillée et précise. En procédant avec méthode selon cette notice, le montage, qui est assez long, se déroule sans accroc, et l'expérience est plutôt gratifiante... Le résultat aussi. Les proportions de l'établi sont idéales pour un usage amateur, les fonctionnalités sont bien pensées, le débord du plateau est un avantage net par rapport à d'autres établis, et, le mécanisme des tiroirs est d'une douceur remarquable. A noter : Il n'y a ni prise électrique, ni éclairage, alors que le descriptif est ambigu sur ce point. Des avis clients précédents avaient relevé ce point, et je n'ai donc pas été surpris. Peut être une réserve sur le produit, vu le prix : des clips de fixation pour les crochets porte-outils auraient été bienvenus. Une réserve mineure sur le colis : Il manquait 2 vis #41 (M4x8L), le sachet de boulonnerie de sécurité n'en contenant qu'une, je n'ai fixé l'étagère supérieure qu'avec 5 vis au lieu de 6 !

Montato da solo in meno di 3 ore, istruzioni solo in inglese e spagnolo e qualche disegno potrebbe essere più chiaro ma alla fine ci si arriva. Nel complesso è veramente bello, robusto e pesante e non pensavo fosse così solido. Aggiungerò un ripiano in legno dove appoggiare gli attrezzi.

Franchement ÉPATE de la qualité. Facile à monter, moins d'1H à 2 pour ma part. LE Plus, les pieds réglables.

Die Werkbank kommt, im Gegensatz zur fahrbaren Werkbank mit 4 Laden die ich vor einiger Zeit bestellt habe, komplett zerlegt. Zugegeben bin ich nicht der Heimwerkerking, aber ich habe jetzt für den Zusammenbau der neuen Werkbank insgesamt 67 Stunden benötigt. Die Montage der oberen Ablage hat alleine 2 Stunden in Anspruch genommen. Hier sollte man mal den Ingenieur fragen, was er sich bei der Konstruktion gedacht hat. 4 mal auseinander gebaut, fünf mal wieder zusammen geschraubt. Am Ende waren da einige Schrauben/Teile die einfach nicht zusammengepasst haben. Am Ende habe ich es mit etwas Improvisation dann irgendwie geschafft. So zur Werkbank selbst. Arbeitsplatte wie immer Top Qualität. Leider ist mir die obere Ablage bei der Montage mehrmals auf die Arbeitsplatte gefallen und so habe ich auch ohne "Werken" schon mehrere Kratzer in der schönen Oberfläche. Aber es ist ja eine Werkbank, da werden noch einige mehr dazukommen. Die Kabeldurchführungen sind für EU-Stromstecker zu klein. Die verbauten Materialien sind wertig und sauber verarbeitet, was für mich den doch recht hohen Kaufpreis rechtfertigt. Auf den Produktbildern wird ein Stromverteiler und eine Leuchte gezeigt. Diese sind jedoch beide nicht im Lieferumfang enthalten.

Prodotto ben fatto, stabile e resistente, la mancanza di un libretto con le istruzioni di montaggio gli fanno avere 4 e non 5 stelle.