TabDock Bizmount Flexpro Heavy Duty Metal Seat Rail Mount with 1-inch Ball Extension Arm for 7"-10" Tablets

Works great and it’s really sturdy ! The flexpro is a little stiff to adjust so you’ll need to apply a good amount of pressure to adjust

Mounted it to the passenger seat belt buckle bolt so that my kids can share an iPad in the 2nd row of the Model Y. I had to stick a piece of felt on the center console so the arm doesn’t run against it though. It bounces a little bit when driving but if you wedge the iPad between the seats, it gets a bit more stable.

The quality of this product is outstanding. Definitely well made and sturdy. There is one design issue if you are wanting to take your tablet in and out all the time. The height adjustment is done from the bottom clamp. This makes it easy to drop your tablet when you hit the release lever. The location of the release lever is also a problem for my mounting location and I suspect for most applications. In order to release the tablet the lever would not open enough with the mount in a straight vertical position. If the release was located at the top it would not have a clearance problem and would be much easier to operate. One easy solution would be to just flip the tablet clamps upside-down. I couldn't do that because the clamps are wider at the bottom and when I flipped it over the top clamp interfered with my power cord. To have enough room to operate the release lever you will have tilt the tablet holder forward or up. One other issue is it does vibrate a little which surprised me because of how sturdy it is. Bottom line: this is a very high quality mount if you are using it to permanently mount your tablet.

I've purchased this product in the past. I have a fleet of logistics vehicles. I have one in each truck. I have had these installed now for over a year. I've only had one broken. Believe me when I say we use them daily, there well made.

seems well built. worked great for what I needed

The installation took all of five minutes and is very sturdy. Also, this evens works if your tablet is in a case!

Purchased June 26th and the pivot head on the stand broke on August the 8th

The plastic at the mounting point cracked upon first attempt to adjust the flexible arm from the top. Heard "crack" when I tried to adjust the iPad to face my direction towards driver side. It didn't completely break off the mount so it was still able to stand and hold the iPad Pro 12" up.Onto the tablet holder, that's the cheapest part of this setup. Barely, I mean BARELY, fits the 12" iPad Pro. Obviously no case, otherwise, forget about it! Love the articulating ball joints, but the tablet sits wayyyy too low. Cannot flip the holder up, to gain more height, cuz it unclips from the arm almost instantly when there's just some vibrations from car movement. Returned it. Not gonna work and cumbersome.