Wheeler Manual Trigger Pull Scale with 8oz to 8lb Value Range for Gunsmithing, Shooting Competitions, and Trigger Adjustments

I have a lot of Wheeler tools. The digital Fat Wrench is one of my favorites. The 'T' handle torque limiters are likewise awesome, both in function and quality of construction. I had a difficult time choosing the Wheeler digital trigger gauge over the Lyman. For example, the Wheeler had a LOT of negative feedback, concerning the display being all scratched up. No issue here, the Wheeler was in perfect, mint condition. Two things made me choose the Wheeler: 1. The load cell is on the end of the arm which allows you to place your trigger finger on it, as you slowly squeeze the trigger. The consistency of the readings are amazingly consistent. 2. The Lyman gauge will display the weight of the operating rod, depending on how you hold the tool. This is because the load cell is in the handheld display unit. Check out the YouTube videos for both. Today. I replaced trigger spring in my CZ 457 Varmint 22Mag rifle. Stock, the factory trigger broke at 2 lb 13 oz. After an aftermarket spring swap, it now measures a consistent 14 oz with no pre or overtravel. Easy adjustments. Nice storage box as well! VERY pleased and highly recommended!!

This is a quality trigger pull scale that does the same job as units 2-3 times the cost. This Wheeler trigger pull scale got good reviews online so I decided to give it a try, and i'm glad that I did. I like how consistent/repeatable it is. I can do 10 pulls in a row and have 8/10 be the EXACT same measurement. The other 2/10 will be within 2 ounces which is pretty darn good. It is easy to use, and you don't have to put the gun in a vise to obtain consistent results. I have no standard for comparison, but it seems accurate within reason. It's definitely not way off. My trigger jobbed 1911 came in at 2.5 lbs, trigger jobbed Beretta Elite II was 2.8 lbs SA, close to stock Beretta 92FS 4 lbs SA, stock Glock 22 6 lbs. Works for both single and double action trigger pulls provided they are below 8 lbs (DA on my worked Beretta Elite II is 5.5 lbs). The printed scale and indicator is easy to read in 2 ounce increments. Very simple to make out 1/2 and 1/4 pound increments unlike other scales. Solid construction, doesn't feel cheap. Has a nice thick rubber coated end so it won't scratch your gun. I slipped one time and it didn't leave a mark. Some other scales have rubber pads, but exposed metal ends that can scratch, so +1 to the Wheeler for that. Operation is very smooth while using it. The internal spring appears robust and makes for reliable and consistent operation (it's just a calibrated spring so it's dummy proof). Amazon shipped the unit very quickly. If you are looking for a quality non-electronic scale at an awesome price point, look no further than this Wheeler trigger pull scale. A very nice tool to have if you work on your guns, or are just curious about your pull weights.

Very easy to use. Provides consistent results. I find these mechanical guages are more consistent than the digital versions.

Have no previous experience with Wheeler products, but due to the low price point I decided to give them a chance to show their stuff. The company shipped promptly and the description of the product was accurate. Looking it over after receiving it in the mail, I noticed right off the casing was plastic and very light weight. The only metal appears to be the spring, a couple of screws internally, and the rod that hooks over the trigger. After trying it on a couple of firearms I have concluded that it is easy to use, the instructions (and warnings) are clear, yet it is not extremely accurate. Of course, if you follow the directions and test the trigger pull 3 times, then the average of the three try's is pretty close. Worked fairly well on a Keltec PF-9 and a Remington 700, but was difficult to use on a Glock 17. I think the issue was because of the trigger safety design on the Glock. Can be difficult to pull the safety and the trigger properly with the hook for the test. However, it can be done with a bit of patience. All in all, it's not very expensive and can give you a reasonable trigger pull weight, and not break the bank. I would recommend it to others with the caveat that you're not purchasing a finely machined piece of equipment,

Loved this thing. Works really well and oh the price.

Works great

This is a common and inexpensive trigger gauge. It is only accurate to .2 lbs per mark on the gauge, but it's easy to use, and that accuracy is good enough. If I remember correctly, the gauge only goes up to 8 lbs trigger pull. After changing springs the trigger pull on a Ruger LCP II 22 went up to 7.8 which I felt decreased the accuracy of shots significantly compared to a 2.8 lb trigger pull on my P17. So I switched to an MCarbo trigger spring package which reduced the trigger pull by about two lbs to 5.8 on the LCP II which might just have to be good enough. All the cool people have trigger pull gauges!

Impressive. I got this because I am now in the 2011 rabbit hole so I needed confirmation of how much the trigger lightened during use. I didn’t have this tool when my Girsan Match X was running stock but from what others have said that averages 4.5lbs. Then last week I just got my Match X back from the gunsmith and he installed Atlas grip kit, Atlas ignition kit, Atlas trigger shoe, and magwell. I was lucky enough to do a 20 trigger average pull before firing and it was 3lbs. 400 rounds later I was averaging 2.5lbs per pull. 600 rounds later and now I’m slightly above 2lbs after the trigger broke in. Then I had to reference my Q5 pistol which already has a broken in trigger and I was getting sub 4lb pulls. My Glock 19x was getting a consistent 5 lb pulls also. So I can definitely trust my readings with this tool,once my other 2011 comes back from DSC gunworks I will reference the trigger pulls as well.

If you tinker and are looking for a simple and affordable trigger pull gauge that will give you and idea of what you trigger is releasing at then this is for you! PLEASE ENSURE YOUR GUN IS UNLOADED, OKAY CHECK AGAIN! Now you are ready to use this.... :-) It is a simple analog scale similar to a fish scale or luggage scale. A small sliding pointer lets you know the approx. pounds that the trigger released at. It is Wheeler so it is well built.

安物と違い、使い易く、正確で、気まぐれな数値が出ませんでした。 流石、実銃を製作している会社さんです。 そして何より、永久保証付きが凄いです。 一生物ですね。

Accuracy is very good, and easy to use, this is my second piece as replacement, the first one received has its rubber covering the sensor somewhat torn and reading are sporadic, Amazon was quick to replace just after 2 days of claim.

Along with a chronoscope It gives a good effect especially on pcp air guns.

Necesario este “trigger pull”para afianar la sensibilidad del gatillo de cualquier arma, ah y es muy accesible en su gusto.