Fiberglass Tub Repair Kit (Color Match), 3.7oz Fiberglass Shower, Porcelain Sink and Acrylic Bathtub Repair Kit, Quick to Fix Cracks, Chips, Dents, Holes on Bath Tub & Toilet, Almond/Biscuit/Bone

I'm very happy with this product's performance and ease of use, but in order to get a color match for my old 1970's almond tub, I had to purchase this kit, which includes yellow, in addition to the HomeTinker kit, which includes a pinkish brown. I mixed a little yellow and pinkish brown, and got an excellent match for the pale yellowish almond color of my tub. So my only complaint for this product, and also for the Home Tinker product, is that it would be nice if they included both the yellow and the pinkish brown, along with the included black. Even with having to buy two different kits to get the color I needed, I'm just glad there is such a product, that does such a great job without noxious fumes! It's wonderful! And here's a great tip for smoothing it! I have a little rubber or silicone squeegee from a Skinomi screen protector kit, and it was perfect because it's flexible. It worked much better than the hard plastic putty knife, and allowed me to smooth rounded edges and corners. It came out great! Of course, there's still some sanding, but not as much.

Works great!

Great repair kit for fiberglass

Works but difficult to color match. No guidance on matching colors

I used this product to fill 6 holes and 2 small nicks in my old acrylic bathtub after removing an old shower door frame. Overall this worked great, the spots are not noticeable from a distance and are only slightly noticeable up-close because I wasn’t able to match the color perfectly since the tub has discolored over the years. But it looks so much amazingly better than it did with the holes or with the shower frame. The only downsides to the kit were 1) I ran out of sandpaper and had to go buy some more, so be prepared if you have difficult or a lot of holes that you may need additional sandpaper (which was easy to get from a home improvement store), and 2) the tool provided for scraping was a bit hard to use to fill holes and evenly scrape the mix across the hole being fixed. I got it pretty close and then put masking tape over top and smoothed the mix out under the tape, and then left the tape on until it was dry for a smoother finish. Also, I’d like to reiterate what another reviewer said - a little color goes a long way. I didn’t add much and the color was already too intense so it took a bit to get it right. So don’t mix all of the A and B compounds together right away in case you need to add more later to lighten your color.

This product is absolutely terrible! The kit I received came with unusable colors that we're dried up. I was unable to match the color of the fiberglass tub I was repairing and ended up looking awful. I do NOT recommend purchasing this inferior product kit.

After I got a new house and find that shower tub has a huge crack, but too late since it was sale as-is, and I didn’t catch that. I was told to just replace the tub, which cost about $200-300 minimum and additional labor cost. I find this product and give a try. It works well. Little patience and art work skill (I’m horrible at both). The instructions are easy to follow. Recommend use tape to tape around the work area for less clean up work (not instruction) depends on the area you work with. It can take up to 24 hours to dry, then sand off to smooth out. The sand papers provided will not be enough unless you are really good at the art work that already think and smooth. I bought some extra high grits and low grits sandpapers to sand off excess and smooth the work area. Little difference in color, if you want perfection, buy the pain for tub. Perfect DIY fix and save big bucks.

I got this kit to fix my new bathroom vanity top that I managed to chip during a faucet installation when I dropped my wrench just as I had completed everything. Of course this was the vanity top that I had to special order and wait almost a month to have delivered. I was ready to rip it off and buy another when I saw this kit and decided it would be worth a shot fixing it rather than replace it as I had nothing to lose. The repair kit came complete right down to a pair of disposable gloves I didn't use but wished I had after getting the epoxy on my hands. There are two fairly large jars of epoxy, labeled part A and B but when I pealed back the foil seal on each I found that both were filled about 1/5 (maybe less) of the way up. In addition to the epoxy were two colorants, black and yellow. I was hoping it would include more colors but since I really needed a sort of gray final color and the fact that the epoxy's are white, mixing a little of the black with the epoxy would do it and it did. Be careful to only add a drop of the colorant at a time as a little goes a very long way and I had to mix more than I needed because it was too dark initially. The epoxy's were thicker (and much more sticky) than I had envisioned and getting them off the popsicle stick I was using for mixing was a bit of a chore. One of the good things about this epoxy is, however, that it has a long working time (probably 30 minutes) and is self leveling. I thought this epoxy would be more like fiberglass resin but it is not. It does eventually dry hard but is not quite as glossy. Long story short, I was able to fix my vanity and match the color pretty well. I notice where I fixed the chip only because I'm aware of it but no one in my family was able to find the repair until I pointed it out. In the end I saved myself a lot of work and about $300 on a new top so it was well worth the effort.

Good product

ممتاز تقدر تحدد اللون التبغاه

I used it to repair minor cracks in my floor tiles. Mixture was easy to work with, and it was easy to achieve a matching tile colour (my tiles were greige).

This save my sink . I did not want to replace it . I had a hole and this did the trick. It is a bit off color but i can deal with it

Filled a hole in a sink where a new faucet was to be installed. The hole was originally for the drain handle. Had to support the fix with a small board underneath the spot. Also a curved restraint to keep the repair from running away. Took several small applications to build up the patch. Most trouble was trying to match the color. Came very close one time, but could not replicate it very well after. However, the result was surprisingly good. Faucet installed and repair is hardly noticeable.