100PD Commercial Grade Pocket / Sliding Door Hardware (60) by L.E. Johnson

I recently installed one of the Johnson Hardware 100PD Pocket Door Hardware Kits and it is a very high quality product. My house is approximately 54 years old and has two remaining pocket doors. We moved in over 20 years ago and one of the door tracks was replaced prior to us moving in. The other door had been a nightmare from day one, constantly falling off the track, bouncing, catching, and not moving when we really needed it to move. After replacing the wheels several times, I finally decided to replace the entire track and hardware. I was hesitant because we have plaster walls and I really didn’t want to open up the wall to remove the old track and install the new one. Further, I needed a solution that would hold the weight of our solid core pocket doors. It seems that the new wheels I would buy we not rated for the weight of my doors. I am a do-it-yourselfer and didn’t want to hire this out. So with the right set of crowbars and other tools, I was able to remove the old track. I also built a tool that would allow me to screw in the new track all the way to the back. Then I cut the track to the proper size for my door, and installed the track. The door hardware was simple to install and the detachable wheel hanger made it much easier to hang the door than it was with the old style single inline track. My door is now working perfectly. It rolls as smooth as silk and very quietly. I couldn’t be happier. While my other pocket door is still functioning okay, I really like the ease at which the Johnson Hardware moves and the quietness, so I am contemplating replacing the track and hardware on that door with another 100PD kit. Before the hardware replacement, I had even debated removing the pocket doors completely and replacing them with standard doors. Fortunately, I didn’t, because now I love my pocket door, and wouldn’t change it, except possibly adding the Johnson Hardware soft-close kits.

Install was easy enough, I'd recommend watching a "how to" video first but other than that this works really well. Smooth rollers, and the door always hangs and slides straight because of the track being two sided. Just take extra care when removing the trim and having a helper at the end to hold the door while I guided the top of the door into the clips was a huge help. It could have been done if I were alone but that part was a lot easier with a helper. The track was about 7" longer than needed but that was an easy hacksaw fix, the track is also a tight fit width wise, but I coaxed it up into place with a rubber mallet and it went in just fine.

"use this for a review if you like" Four in one product revue for DIY project. Needed new TV for back deck purchased TLC 49” Roku Smart TV = $299.99 Wanted to mount it from above purchased Loctec CMI celling TV mount = $37.99 Wanted ability to move for protection when not in use purchased 100PD sliding door Hardware = $32.06 Needed to protect it form weather purchased outdoor TV cover 47” = $25.99 Total project cost $$396.06. project time 2 to 3 hours # 1. TLC TV, very satisfied, nice unit, good picture, easy to use, great price. #2. Loctec celling mount. Very satisfied, 360° rotation and much more. I mounted it to wheels of pocket Door hardware. This allowed it to rotate and roll flat against the wall when not in use. #3. Johnson Hardware 100PD sliding door Hardware. I mounted the track beneath upper deck with Screws, attached the wheels to the TV mount. I left the end screw out far enough to keep the Wheels from rolling out of track, remove screw to take off for winter. #4. Mount Factory outdoor TV cover 47”. It is made to be removed each time you use it, I cut it on each End and attached velcro so it can be opened the front rolled up and placed on top of TV when viewing. SEE VIDEO ALL PRODUCTS FROM AMAZON

Replaced, not one, but 2 pocket door tracks with this system. Moved into a home that was 40 years old and had the same pocket door tracks. Needless to say, the doors wouldn't stay on the old tracks, making the doors completely useless. These tracks are such an improvement on the old design. There is no flex with the track and no way for the door to fall off the track. Super easy to install, just know you have to cut a hole in your drywall, and remove several pieces of trim from the door frame. My doors work great now, slide smoothly everytime! I would highly recommend this track system to anyone need I g to fix their pocket doors!

Perfect