Front bumper

Great fit. My husband put it on himself and it looks great. He has a 2013 Jeep Wrangler, great fit, matches the color well. Easy to put on had all the parts and instructions. Great buy our winch fits well also.

Bought this bumper as a Christmas gift. It's very well build for the price. Fits like a glove and bolts right on. Kid did hit a pole with it and it took it well so it's built right plus saved the front end of the jeep.

This took 2 people to install, about 2.5 hours. It probably took that long due to having to run for parts twice. The issues we had started with the welded bolts being off, so we had to hammer two of them a little to get them to line up correctly. The factory fog light screws do NOT fit this bumper. We had to go get new bolts and nuts, which were a tad difficult because there’s not much room to work with on the outer part of them. We also had to stretch the fog lights further than factory. Luckily, there was extra wire and we didn’t have to splice anything. Overall though, once installed, it looks great and I will be getting a winch installed on it soon! The couple headaches didn’t outweigh the positive. For the price, I think it’s a good quality bumper!

This is a great sturdy bumper. Lots of room behind to run wires or whatever and keep it protected. I am impressed. Only had it a short time but well laid out. OEM Fog lights was a nice touch! Mounted 12k Badlands Winch easily and the front camera was easy to install as well. I like how it is not "In your face" but very functional for off road. Install was super easy. Find the bolts to remove the old bumper after removing the connection to the Fog Lights, move the fog lights to the new bumper, mount it up, and done! Fog Light wires fit, however, just barely. Had a bit of work to do there, but 10 minutes maybe. Total install, taking my time, two hours. One thing I upgraded was the D-Rings, these in the pic are the galvanized ones that came with it and I upgraded to some black ones. I really like that look a lot better! The Winch was easy to mount and route the wires. Did take a bit of time to decide where I wanted the on/off switch, but decided to put it under the hood by the battery. Works well! I had a License Plate bracket that took two self tapping screws to install. When I go off-roading, I will be able to easily take it off so it does not get damaged. (Don't remember where I got it, but any of them will do). The front camera (hard to see) mounted nicely above the License Plate but below the winch where it will not be in the way. Note, did have my German Sheppard supervising the whole time... She likes it as well!

Love it it fits great and looks great too !

When this product arrived the box was slightly damaged. After inspection the superficial damage did not appear to affect the package contents. When trying to install factory fog lights, screws for the fog lights were not included. #5 on instructions, "Install the factory fog lights into the openings in the back of the new bumper using the small bolts and locking nuts supplied with the bumper." I contacted customer service and they told me screws were not included and to "just use the original screws". The original screws are self tapping plastic screws for a plastic bumper. This bumper is metal with slotted holes! How will the originals ever work? OK, so I go buy screws and lock nuts... The slotted holes in the new bumper do not line up with the factory fog light holes! After making modificatons/adjustments I get everything mounted and attach the bumper. The fog light holes are too far apart and the factory wiring will not reach!!! I had to rewire the fog lights too lengthen the wiring. THIS PRODUCT IS NOT A FACTORY REPLACEMENT!!! You can make it work and it does look good after installation, but if you are looking to surprise you wife on her birthday while she is out of the house for a couple hours think again!!! I will try to get some pics after she returns today.

Bumper arrived packaged well. There was apparent damage to the left and right side likely due to handling before shipping where it was bare to the metal (small area on corners). Company does not provide matching paint to fix. Will have to purchase another coating to stop rust from occurring. Otherwise, it was a decent bumper.

Just finished with the installation of the bumper & winch. The winch was not purchased through Amazon. A little about my Jeep. 2008 JKU. 2.5 inch lift. Was looking for a bumper to add a winch. Review: Packaged nicely. No issues with the product out of the box. As others wrote, holes lined up great for bumper, fog lights, and winch. I bought the fog light extension wires. Even though some noted they were not needed, I felt it made the install easier. I was able to salvage the plastic undercarriage, too! Rears connected to stock holes. I used zip ties for the front. Winch installed easily, with the winch and fairlead holes lining up perfect. Install Tips: I'm in my 60's and was able to do this in the garage by myself. Whole thing took me 3 hours. Could've cut down an hour if there was more room to get the nuts on the bolts for the fog lights. That was a bear! You have to be ambidextrous to get the fog lights installed. You'll need a 2.5 m allen and 8m box wrench to hold the nut on a couple of them. Others, you need long fingers and lots of patience. Swivel head ratchet with extensions and deep sockets, helps with the bolts and nuts for mounting to the bumper. Lastly, I broke 10 drill bits drilling 2 holes for the license plate. It would've made a world of difference if they'd have those pre-drilled. Overall, happy with the purchase, install and product. Would recommend to other early JK owners.

Solides et durables Dit parfaitement sur un jl 4xe 2022

Very happy with bumper fit great and all proper hardware was provided great product

Ordered, given ship date, that came and went so weeks after I tried to cancel and as soon as I did I was told now it’s being shipped. By the time it arrived I had bought another one for sane price and it was much heavier and sturdier than the nilight so I returned it.