2 Pack Dimmer Light Switch, Universal Lighting Control, Single Pole or 3 Way, Compatible with LED Dimmable Lamp, CFL, Incandescent, Halogen Bulb, Decorator Wallplate Included, UL Listed, White

Installed it for our bathroom light. It has been working very well. Absolutely love it. Great quality as well

So I like these switches so far. They are fairly loud/clicky as far as paddle switches go, but that's not really a problem for my usage. For reference, the noise level is comparable to the Eaton (non dimmer) paddle switches I bought from the big hardware chain. They feel just like any other paddle switch and are extremely similar to the GE dimmer paddle switch I bought a few years ago. Standard installation with 4 wires and wire nuts. I cut the wires a little shorter before installing them because my switch boxes were already tight without the extra 4 wires and wire nuts. Lots of reviewers have mentioned issues with dimming and flickering, and I've had a peculiar experience with that. First off, I like the dimming adjustment--I didn't think I would care about it but it's a really nice feature to have. I was able to tune the dimming brightness to exactly the setting I wanted. I'm using two of these switches with a bathroom vanity fixture that has four G9 light bulbs. I got some dimmable LED G9s and I've had no issues with flickering. However, when I tried one of these switches with a standard E26 dimmable LED, I got a lot of flickering, even with a bunch of adjustments to the dimming level. I suspect that could be related to my old socket/fixture or the wiring on that particular circuit, but I'm not an expert and it's hard to tell. I want to try a few more light bulbs before I can say definitively. Overall I'm happy with these, but YMMV with the dimming and flickering. If you're having flickering issues, try adjusting the dimming settings or try different light bulbs before you give up!

Bought this to replace a GE switch in a 4 gang electrical box because the price was much cheaper, this switch is a little larger than a typical GE rocker switch so when I put the wall plate on this switch would bind and not work. If you’re using this switch in a single gang with the included wall plate it should be fine but beware if installing in a multi gang box with a different brand of rocker switch. The switch itself seems to be decent quality

Easy install. Works as advertised.

I bought these after living with bright lights in our living room for a year. I put a few of the dimmers in a few locations in the house and the living room is a 3 way switch. I spent hours trying to figure it out and never could. I found the constant 120v with a multi meter. I then hooded it up in every other combination there is possible. I don't know if it's the way the original electrician wired the boxes or the dimmers themselves. I tried one location and then the other location. No matter what I did the lights would sometimes work and sometimes not. Usually would work better with 80% or more brightness. Any lower would sometimes work and sometimes not. Or work for lets say 5 times on and then not at all. Very wonky. Lastly I was going to leave it, but the back part is so wide and the metal they used around the fixture (maybe for spacing) would hit the wide black backing and I could not even install it in the right position for the face plate that had two other switches on it. So In the end I could not use the 3-way. On the other single pole switches I installed them really easy no problems there, but every time I turn off the light and the go to turn on the light it wont turn on until I flip the switch off and then back on again. Very annoying to have to almost like reset it by flipping the switch on and off. I was excited for these and will just use them for the single pole locations, but I'm just settling. eventually will probably replace them for something else.

Purchased two because one was the same price but had it installed same day and it look great and works well.

These dimmer switches work perfectly! They provide smooth, precise control over my lighting, and installation was straightforward. The switches feel solid and high-quality, and they are very responsive. Considering the incredible price, this is an excellent deal for anyone looking to upgrade their lights. Highly recommend for both home and professional use!

These have an adjuster, but it does not work well. My LED lights flash with these dimmers. I’ve had to replace every one of them with a better quality unit. I do not recommend these.

The dimming on led light doesn’t work…it’s flickering.

We installed them in kitchen works great

In 3-way applications if you mix up the line & load red wires it will work but causes a strobe or flickering effect.

I also had an issue with one of the dimmers in the duo pack. i was offered to return the both for credit but preferred getting a replacement. I am building an addition to my house and I have all my electrical supplies from this company(switches, single pole and three way, réceptacles with and without USB chargers, dimmers including wifi also face plates single, double and triple) this dimmer was the first piece that gig not function properly. everything else worked great. I found their product to be of excellent quality, well built sturdy and dependable. I hot a replacement dimmer in two days, yeah,two. the dimmers do require some micro adjustments but with the money I saved on all this equipment, I could afford the extra 3 minutes in labor. A great product at a very reasonable price and an outstanding after sales service.

Very easy and great for the money