Dorman 970-012 ABS Wheel Speed Sensor Compatible with Select Models

This is a great value and worked! It cured the ABS warning light on my 1999 4X4 Ford Ranger XLT (4.0L V6). Warning! I installed it without jacking up the truck. They are not kidding in the YouTube videos when they say you must be VERY careful not to break the plastic retaining clips. Try using your fingers to release the clips. If you use a small screwdriver you are likely to break them. Even knowing this I inadvertently broke one side. So now I only have one clip holding it in its socket. However, it was hard to purposely pull the connector out so I have confidence no road vibration will ever move it. For laughs? Call the Ford dealer and get an estimate on this job. $$$! Good luck!

works great

Easy to install (depending on how rusty and dirty the top of your rear differential is) replacement speed sensor to correct "Rear Anit-Lock" warning on dash. Worked for me. Very inexpensive fix.

Fit great and works as it should

This unit worked perfectly, read out the exact same values as the original that I was replacing. I used Forscan to read the GEM inputs from this unit, and the ABS modujle to read the raw values, and this unit was putting out exactly the same values as the original Ford MoCo original OEM part. Unfortunately, it didn't solve my problem, which is still a mystery, which is that the GEM seems unhaopy about the input (which is why I was changing the original part, which apparently had not failed.) But the electric output values looked EXACTLY the same, so I would say that this is a very good after market replacement at a great price. Fit and finish are near identical to the OEM part. Just didn't solve my problem.

Perfect fit for my 2000 F150. It didn’t fix my ABS light on the dash, but I believe it’s one of the front wheel sensors. Either way, this was an easy and inexpensive replacement with a good product.

My 2000 Ford Ranger suddenly lost its speedometer function and the ABS and Check Engine light turned on. Scanning the codes returned the diagnostic trouble code P0500, "Vehicle Speed Sensor A Malfunction". For third-gen Ford Rangers equipped with the standard Rear-Wheel ABS (colloquially known as 2WABS or RWABS/RABS) the ABS sensor IS the speed sensor. It's a small Hall effect sensor mounted on top of the rear differential with a single 3/8" bolt. Installing this inexpensive part took only 10 minutes and didn't require me to jack up the truck or anything fancy. It's as simple as checking the oil. Save yourself $200 in diagnostic, parts and repair at your local mechanic and fix it yourself. Tips: -Soak the bolt head in penetrant oil like PB Blaster the night before. -I'd recommend loosening the bolt before attempting to release the wiring harness so you gain better visibility and access to avoid breaking the delicate plastic harness clip. -Lubricate the O-ring on the new part and ensure the sensor seats flush into the differential case or the sensor will not work or only work sporadically. Symptoms of a sensor that are not seated include recurrent ABS light, ABS engagement under light braking, and the speedometer needle dipping or jerking when the brake is applied.

Liked that it was very easy to install. It’s a sensor, so it tells you that there is a problem, not that it is the problem. Theses sensors very seldom go bad, but the wiring and the pigtails do. Clean them and use dielectric grease (pigtail,connectors).

Buen producto y de calidad, fue compatible con mi ranger 2006 motor 2.3 argentina

Used on 1997 f350 and worked perfectly,

Amazing product a bit different than the original but still fit and better ! Had an issue with the speedometer needle going crazy after 60 km/h + needle wouldn’t work between 0-30 km/h + ABS light on the dash was on Replaced it in 5 minutes without jacking the truck (Ford E350 1992) Problem was fixed instantly ! Be careful with the plastic ears from the connector they are easy to break Remove the old sensor before disconnecting the harness it’s easier this way

Perfect match, truck is back in action, no problems!

Easy install, fit as advertised, time will tell how long it lasts.